Cosplay / Costume design
This is my first cosplay/ costume design I did.
So the beginning of this process was making the costume head, below you can see me making the round shape with paper mache and marking where the shapes of the eyes and snout will go
Once the basic shape was done I layered in some fabric strips to make the shape sturdy and put the eye and snout section on the round head.
Once all the sections were attached I cut the eye holes out and used a georgette so i had some visibility and you could not see my face.
I also add the teeth on the head.
I also add the teeth on the head.
The image below is a test of the fur for the head / ears.
Below is the head covered in fur with the lights on.
I had created the body part of this costume already but unfortunately don't have any making of pictures.
Below is the prop I made for the costume.
Below is the prop I made for the costume.
For this I used foam board and fabric and used stuffing in between the layers to keep it sturdy, then once glued together I added little clay claws.
Once the claws were added I put the fur on the prop
Here are some finished pictures of the costume :)
Bonus pictures
What you don't see on my back is the backpack(back bling) I created to go with this costume.
I digitally drew out the image you see on the first image and then printed it on fabric and recreated the whole back bling even with a resin glowing cube :)
I digitally drew out the image you see on the first image and then printed it on fabric and recreated the whole back bling even with a resin glowing cube :)
The image below is what it looked like on fabric.
