Drainage Geocomposite in Delhi, NCR
A drainage geocomposite is made by putting a layer (called a geonet) in between two pieces of geotextile. Because drainage geocomposite is made of two different kinds of materials, it can drain, filter, separate, act as a barrier, and it's pretty much safe. Using the Drainage Geocomposite in Delhi NCR can be beneficial as it is the most polluted city in India.
Drainage geocomposites usually have a High-Density Polyethylene geospacer in the middle and a Polypropylene geotextile bonded to one or both sides. They are usually defined by the type of material in the middle. They are light, cheap, and can drain as well as better than standard granular drainage solutions that are wrapped in geotextile or put inside porous concrete.
Water Flow:
Water moves through drainage geocomposites much faster than it does through grainy drainage media. This means, for example, that a 6mm layer of drainage geocomposite can handle the same amount of water flow as a 300mm layer of grainy drainage and that the open void structure of drainage geocomposite makes it around 50 times more permeable than drainage gravel. Taking into account how heavy each material is, this means that 1 kg of drainage geocomposite and 1,000 kg of drainage rocks have the same flow rate.
Drainage Filtration:
Drainage filtration using geocomposites to prevent silt and soil particles from clogging pipes or raising friction levels. Geocomposites are made up of a geonet and a synthetic needle-punched geotextile that are joined together with heat. It is the best choice for uses involving landfill liners. Geocomposed drainage solution is the best choice for drainage uses that need filtration to keep silt and soil particles from blocking the flow.
Features of Drainage Geocomposite
It moves the water to the collection drain and spreads out the pressure.
It takes the place of the gravel used for drainage behind the reinforced earth wall panel.
Taking away extra water from the soil.
It works better than the usual way of using sand and gravel as drainage material.
Less time spent building is good for the business and the environment.
Depending on what the project needs, composites can be made to fit.
The goal of Geocomposite materials is to blend the best parts of different materials in a way that meets specific needs and for the least amount of money. Most of the time, geosynthetic materials will be used to make these geocomposites, but not always. In some situations, it may be better to use a non-synthetic material along with a geosynthetic material to get the best performance and/or lowest cost.
