Wooden Tape Dispenser
By : Beckah Sullins
This tape dispenser is capable of accommodating three rolls of tape, whether they're 1-inch or 2-inch wide. Crafted for durability, this dispenser provides a straightforward solution for organized tape handling in any workspace, easily attachable to a workbench.
![](https://mir-s3-cdn-cf.behance.net/project_modules/max_1200/965c2f190608031.65bd4cb782d6d.jpeg)
Step 1 was to measure and cut the pieces for the body and slots of the dispenser
![](https://mir-s3-cdn-cf.behance.net/project_modules/max_1200/9c0961190608031.65bd4cb789efe.jpeg)
Step 2 was to make the slots for the inside pegs on the inside Wood pieces in order to hold the rolls of tape.
![](https://mir-s3-cdn-cf.behance.net/project_modules/max_1200/e4f8f4190608031.65bd4cb787893.jpeg)
Step 3 was to cut the wooden squares to go inside and hold each roll of tape
![](https://mir-s3-cdn-cf.behance.net/project_modules/max_1200/7ad85a190608031.65bd4cb78b1d0.jpeg)
Step 4 required us to measure the center of each wooden square and drill a hole into each piece in order to put a wooden peg through the center
![](https://mir-s3-cdn-cf.behance.net/project_modules/max_1200/793246190608031.65bd4cb788c3d.jpeg)
Step 5 was to measure and cut the wooden pegs to the correct length of the wood slots for the tape to be able to roll and be dispensed
![](https://mir-s3-cdn-cf.behance.net/project_modules/max_1200/a08bcb190608031.65bd4cb784b3d.jpeg)
Step 6 was to assemble all of the individual pieces and cut a hacksaw blade to drill onto the front edge of the tape dispenser
![](https://mir-s3-cdn-cf.behance.net/project_modules/max_1200/a8f958190608031.65bd4cb783beb.jpeg)
Final Product
![](https://mir-s3-cdn-cf.behance.net/project_modules/max_1200/909365190608031.65bd4cb786183.jpeg)