In recent years, under the continuous expansion of corn planting area in China, corn harvesters have been popularized, greatly improving agricultural production efficiency and reducing the labor intensity of farmers' friends. After several years of development, the performance of corn harvesters has become more and more perfect, and the technical requirements are high. However, when using the harvester, you must learn the correct operating procedures to ensure the efficiency of the work, extend the life of the machine, and avoid some accidents. Let's share with you the operation rules of the corn harvester.
Regular operation of 2 rows Tractor Mounted Corn Harvester :
1. Perform shift maintenance before daily operation to ensure that all parts of the machine are normal. Do not throw tools in the machine to prevent injury and damage to the machine.
2. During the march, the harvester is not allowed to go up and down. Pay attention to obstacles such as wires and trees, pay attention to the bearing capacity of the bridge and the passability of the gully. Non-crew personnel must not be on the harvester.
3. Do not touch the rotating part before the corn harvester is running and not completely stopped. It is strictly forbidden to put your fingers into the gap between the cutter, between the sprocket and the chain, between the pulley and the belt, and adjust the harvester. Do not put the arm into the drum to tear the straw. It is strictly forbidden to start the machine or turn any part when the unit is being repaired.
4. When the 2 rows Tractor Mounted Corn Harvester is unloading grain, it is not allowed to reach into the unloading grain mouth and smash the grain to prevent the auger from damaging the arm.
5. Every time you stop, be sure to put the travel shift lever, working clutch and unloading clutch on the neutral position to prevent danger when starting again.
6. It is strictly forbidden to place metal objects at the battery and other wire joints to prevent short circuit. Always turn off the main power switch when repairing in the middle, closing the work on the same day, and welding parts.
Regular operation of 2 rows Tractor Mounted Corn Harvester :
1. Perform shift maintenance before daily operation to ensure that all parts of the machine are normal. Do not throw tools in the machine to prevent injury and damage to the machine.
2. During the march, the harvester is not allowed to go up and down. Pay attention to obstacles such as wires and trees, pay attention to the bearing capacity of the bridge and the passability of the gully. Non-crew personnel must not be on the harvester.
3. Do not touch the rotating part before the corn harvester is running and not completely stopped. It is strictly forbidden to put your fingers into the gap between the cutter, between the sprocket and the chain, between the pulley and the belt, and adjust the harvester. Do not put the arm into the drum to tear the straw. It is strictly forbidden to start the machine or turn any part when the unit is being repaired.
4. When the 2 rows Tractor Mounted Corn Harvester is unloading grain, it is not allowed to reach into the unloading grain mouth and smash the grain to prevent the auger from damaging the arm.
5. Every time you stop, be sure to put the travel shift lever, working clutch and unloading clutch on the neutral position to prevent danger when starting again.
6. It is strictly forbidden to place metal objects at the battery and other wire joints to prevent short circuit. Always turn off the main power switch when repairing in the middle, closing the work on the same day, and welding parts.
